Ultimate Bench Hardware Set
Ultimate Bench Hardware Set
When it comes to your shop, whether you're starting from scratch or retrofitting an existing bench, HNT Gordon has the ultimate kit to make the most of an incredibly valuable tool, your workbench.
FREE Set of 1/2” shaft Bench Dogs (two of each size in brass; 10 total)
You have the option of the 100mm or 150mm Tail Vise, as well as either the Front Vise or Wide Jaw Front Vise. You also have the option of two 1/2” bench dog holes in the top edge of the front vise.
Note: The front vise does not come with dog holes drilled in the top edge of the vise jaw as seen in some of the photos/videos. You can select this option if desired. HNT Gordon will drill two 1/2” dog holes 40mm (1.577”) from each end, which makes them 150mm (5.906”) apart. HNT Gordon recommends this spacing, but if you want a different spacing, please email me to order as this will be a custom order at an additional charge. If you decide to add dog holes once you receive your vise, HNT Gordon recommends not to do them larger than 1/2" as it may compromise the jaw, and you will lose your warranty.
Please click the above links for more information about each item, as well as installation guides for the vises.