Front Vise






Front Vise
HNT Gordon’s new concept designed and made in-house in Australia.
Bench Vise Features:
Non racking
Simple installation
Opens 6”
Jaw is 9” wide x 6 3/8” high
Weighs 17.6 lbs
Thread is 6 TPI ACME for fast, smooth action
Hidden thread to prevent dust wearing the thread
Tried and tested in real work shop conditions on a daily basis for five years to ensure quality before being offered for sale
Download the installation guide here.
Note: The front vise does not come with 1/2” dog holes drilled in the top edge of the vise jaw as seen in some of the photos/videos. You can select this option if desired. HNT Gordon will drill two 1/2” dog holes 40mm (1.577”) from each end, which makes them 150mm (5.906”) apart. HNT Gordon recommends this spacing, but if you want a different spacing, please email me to order as this will be a custom order at an additional charge. If you decide to add dog holes once you receive your vise, HNT Gordon recommends not to do them larger than 1/2" as it may compromise the jaw, and you will lose your warranty.
Watch a video of Terry Gordon, HNT Gordon’s founder, install this vise on a work bench.
Questions? Please contact us.