Side Rabbet/Rebate Plane Pair with Dovetail Fence

Side Rabbet/Rebate Plane Pair with Dovetail Fence

$684.99

These Side Rabbet/Rebate Planes are used for trimming and fine tuning rabbets, dadoes, and other hard to reach places on moldings. Used with the dovetail fence, the Side Rabbet/Rebate Plane can be used for converting a dado into a tapered sliding dovetail joint. The dovetail fence can be used with either the Left or Right Hand Plane. The fence is fit with a wooden shoe which sets the dovetail angle.

  • Each is 8 7/8” long x 7/8” wide x 2 5/8” high.

  • Each weighs 1.3 lbs.

  • Blade is 7/8" wide x 1/8” thick Tool Steel hardened to RC 62-64.

  • Blade pitch is 50 degrees for superior results.

  • Sole is a concave 1/2" radius, 90 degree segment on the left or right hand side of plane.

  • Boxed in brass to minimize wear.

  • Dovetail fences are 3/4” wide x 3 1/2” long and can be adjusted up and down from 0” to 7/8”.

  • Made from Gidgee, a very dense and stable Australian wood.

This pair comes with one dovetail fence that will fit both the left and right plane.

Download the Side Rabbet Plane Guide here.

NOTE: If you would like a custom fence angle, please contact us directly to place your order. These can also be special ordered individually, either right hand or left hand.

Questions? Please contact us.

Dovetail Fence Angle:
Quantity:
Add To Cart
Right Hand Side Rabbet/Rebate Plane with Dovetail Fence HNT-Gordon-Right-Hand-Side-Rebate-Plane.jpg

Right Hand Side Rabbet/Rebate Plane with Dovetail Fence

$404.99
Moving Fillister Plane HNT-Gordon-Gidgee-Moving-Fillister-Plane.jpg

Moving Fillister Plane

$1,574.99
Shoulder Plane - 1 inch HNT-Gordon-one-inch-shoulder-plane-in-action.jpg

Shoulder Plane - 1 inch

$259.99
Shoulder Plane - 3/4 inch HNT-Gordon-three-quarter-inch-shoulder-plane-wedge-mechanism.jpg

Shoulder Plane - 3/4 inch

$244.99
Shoulder Plane - 1 1/4 inch HNT-Gordon-one-and-a-quarter-inch-shoulder-plane-mouth.jpg

Shoulder Plane - 1 1/4 inch

$294.99